Today, with the advancement of science, we see unique and better features of the development of cars, such as improvements for the safety and well-being of drivers as well as car occupants. One of these options is cruise control. Cruise control is called the vehicle speed maintenance feature. Cruise control is most useful when we need a constant speed or on the road and is adjusted by the driver. Cruise control is found in many cars today and helps keep the car at a constant speed, and this feature automatically helps the driver to continue driving at a desired and constant speed. For example, you can set the car speed to seventy kilometers and continue driving without having to press the brake and accelerator pedals. Reduce or increase the speed by using the cruise control button. The method of using the cruise control cream is that the speed is controlled by the control to the combustion chamber of the car and remains the same as the method done by the accelerator pedal with this difference. This is done automatically by the cruise control connected to the actuator by a cable connected to the actuator. This method is manually adjusted by the driver by means of buttons dedicated to this task in the car. Long, difficult roads are very convenient without the driver feeling tired. How to get out of cruise control mode is to press the button that is contracted to cancel this mode. Normally, the clutch pedal must be depressed. One of the cruise control features is the ability to return to the previous speed. With this feature, after canceling the cruise control mode, you can return to the previous state. The resume button is like a retainer and saves and applies the former speed. Adaptive control is Cruise control There are three categories. One. The most equipped and advanced type of cruise is two sensors located in the rear and front of the car. These sensors completely control the time interval behind and in front of the car. In the second case, the cruise control adjusts the speed of the car and controls the time interval. And the third type of control is controlled by the normal speed of the car and its time interval can not be controlled. The introduction of cruise control buttons is as follows: its button and F are responsible for turning the cruise system on and off. Set button on cars that do not have an on button. Off is the task of turning on the cruise and by pressing the brake, the cruise mode is canceled. Accel is used to increase the speed of the car, and by pressing it, the speed is increased by one kilometer. Coast and this button is used to reduce the speed of the car and by pressing it, the speed decreases by one kilometer per hour.
If you are planning to rent a car in iran , be sure to use these car options.