Important tips for driving an automatic car
Have you ever experienced driving an automatic car? Today, there are automatic cars in the market that have greatly simplified the work of drivers. Cars with automatic transmission are increasingly in demand. Driving such a vehicle is not difficult; But it is important to know some of the subtleties of how to properly drive an automatic vehicle.
This prevents breakdowns and other car problems. In this case, there are tips that can be useful to know; So stay with us in this article to learn them.
The rules of driving an automatic transmission are not complicated. To do this, first fully apply the brake and move the control lever from P to D or R while driving backwards. Next, lower the parking brake and slowly release the brakes until the car starts moving.
To increase the speed, you can slowly press the gas. You should only operate the pedals with one foot so that there is no temptation to press the brake and gas at the same time.
Gear change in automatic transmission
Gear shifting is done automatically and the driver only has to press the gas and brake pedals. A lever is used to control the operation of the gearbox. By studying the basic modes, you can easily learn how to change gears correctly in an automatic transmission.
P is from the English word parking for brake. At this time, the wheels are locked while the engine is running. Use this feature when parking or warming up the engine. You should not turn on the mode while driving or before any traffic lights and it is better to use the brakes.
Do not confuse mode with handbrake. Handbrake is more reliable. R for reverse in English is used to involve reverse. D is taken from the word drive or go and is used when moving forward to automatically engage the gears.
Some machines are equipped with additional modes that are digitally determined. These additional modes are used when driving in different parts of the road (off-road, icy conditions, steep slopes, etc.).
There is also an L or B designation for reduced speed driving. (An important point in driving an automatic car is that it is forbidden to turn it on at a speed of less than 30 km per hour).
N English word neutral means neutral, in which case if the brakes are not applied, the car can turn freely.
O/D allows you to use higher speeds that are normally off. The button corresponds to 5 gears in mechanics. Automatic gear shifting occurs when driving an automatic car, when the gas pedal is pressed, and when D or R is engaged.
Automatic engine braking
For an inexperienced driver, operating an automatic transmission after a manual transmission can lead to some errors while driving an automatic car. Before stopping the vehicle, fully apply the brakes and engage D mode. When stopping for a long time, adjust the mode from P to N. You can take your foot off the pedal after braking.
when driving an automatic car, use the handbrake in cases where it is necessary; Such as stopping with the engine running or on a slope and stopping to change a wheel. You should not use your other foot to work with the automatic transmission. It is better to place your left foot near it, but not on the pedal.
For those who have mastered driving manual cars, learning to use an automatic will not be difficult. The main thing is to get used to using one leg. There are some things to keep in mind when driving an automatic car.
Do not exceed 50 km/h when towing.
Do not press the gas when parking. You just have to slow down slowly.
If the car is skidding, it is better to slow down and press the brakes like a clutch. As a result, the wheels turn slowly.
Using the recommendations, you can quickly learn to drive an automatic car. In this article, we have described some points that will make you enjoy driving your automatic car.